View AV9SLD2023002K_6680027.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

b-88 apem www.apem.com av se ries anti-vandal and security pushbutton switches distinctive features b ? attractive, robust and durable ?irremovable anti-jamming construction : reduced travel to prevent insertion of foreign parts contact and mechanism protected against crushing fire resistant ?long life ? sealed versions ? degree of protection (switches mounted on vertical panels, as shown opposite) : - standard version : ip54 - sealed version : ip65 examples of mounting for sealed versions preferred with boot u2187 (sect. h) ? o-ring packaging unit : specified on the following pages. mounting accessories : standard and special hardware are presented in section i.
apem www.apem.com b-89 av se ries anti-vandal and security pushbutton switches distinctive features b the av series is a large range of security pushbutton switches including 4 product families : anti-vandal pushbutton switches (page b-90) ?increased impact resistance provided by a nut ( 19 mm) or mechanical stop ( 22 mm) ?stainless steel actuator and bushing ?bushing dia. 19 (.748) or 22 mm (.866) security pushbutton switches with large actuator (page b-93) ?ergonomic actuator dia. 20 (.787) or 30 mm (1.181) ?tactile feedback ?up to 5a 250vac ?bushing dia. 22 mm (.866) or 24 mm (.944) other security pushbutton switches (page b-96 ) ? a large variety of actuator shapes, electrical functions, connections, finish and marking options ?bushing dia. 16 (.629), 19 (.748) or 22 mm (.866) snap-action security pushbutton switches (page b-104) ?tactile feedback ?illuminated or non-illuminated ?bushing dia. 19 mm (.748) ?models with overmolded actuator
b-90 apem www.apem.com av se ries anti-vandal pushbutton switches distinctive features and specifications b specifications max. current/voltage rating with resistive load (c contacts) : 2a 48 vdc ?approved ratings of models with long case and a contacts (av..000) : ul-csa : 4a 250vac - 8a 125vac - 6.000 cycles ?initial contact resistance : 10 m ? max. at 1a 2v insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 2.000 vrms 50 hz min. between terminals and frame 2.000 vrms 50 hz min. between terminals electrical life : 10.000 cycles at full load ? orque : 5 nm min.- 14 nm max. applied to nut ?panel thickness : 1 (.039) to 11 mm (.433) max. ?operating temperature : -30? to +70? ?mechanical life : 1.000.000 cycles ?packaging unit : 20 pieces (models 22) or 40 pieces (models 19) materials ?case : pbt ?contacts : brass, silver plated (c) or silver (a) ?bushing : stainless steel ?actuator : stainless steel cut - outs ?panel cut-out : 19,2 mm (.755) or 22,2 mm (.874) ?min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) robustness sealing ( option t ) model 19 mm (.748) model 22 mm (.866) impacts on actuator according to cecc 96000 hammer radius 10 mm 0.3 kg 34 cm 10 strokes striking energy: 1 joule (1nm) 10 strokes striking energy: 5 joules (5nm) 34 cm 1.5 kg degree of protection according to en 50102, june 95 (nfc 20-015) hammer radius 25 mm hammer radius 50 mm ik08 striking energy: 5 joules (5nm) 1.7 kg 29.5 cm ik10 striking energy : 20 joules (20nm) 5 kg 40 cm ? increased impact resistance provided by a nut or mechanical stop ? stainless steel actuator and bushing ? ul-csa approved (long case only) ? internal gasket ? external gasket front panel sealing (ip65) 1 2
apem www.apem.com b-91 av se ries anti-vandal pushbutton switches bushing 19 (.748) - momentary (no) b no (function 3) short case - flat actuator - av09100...40n hex nut 22 (.866) across flats 7.30 (.287) 2.00 (.078) (.374) 9.50 6.50 (.255) (.118) 3.00 ?9.00x1.00 si (.748diax1.00 is) 3.00 (.118) (.866dia) ?2.00 ?5.00 (.590dia) (.866dia) ?2.00 (.196) 5.00 epoxy 2.80x0.5 (.110x.019) 1.20 (.047) 2.80 (.110) screw terminals av 0 91003c940n solder lug / quick-connect term. av 0 91003c240n order format series bush./act. config. case style function contact material te r minal type bush./act. material sealing av 09 19 9d 100 000 3 9 2 c a 40 n t long case - flat actuator - ul-csa approved - av09000...40n hex nut 22 (.866) across flats 6.50 (.255) (.283) 7.20 (.456) 11.60 (.196) 5.00 2.00 (.078) 22.00 (.866dia) 19.00x1.00 si 3.00 22.00 15.00 (.866dia) (.590dia) (.748diax1.00 is) (.118) screw terminals a v090003a940n curved actuator screw terminals a v19?03c940n solder lug / quick-connect terminals a v19?03c240n flush model screw terminals a v9d?03c940n solder lug / quick-connect terminals a v9d?03c240n other configurations basic model (.078) (.590dia) (.866dia) 2.00 15.00 22.00 (.141) 3.60 (.866dia) 22.00 (.047) 1.20 (.874dia min.) (.755dia) 19.20 22.20 mini (.051 min.) 1.30 mini to order a sealed product, replace n with t at the end of p/n. case style : replace ?with 1 for short case and 0 for long case. new! screw terminals for wires 1,5 mm 2 max. screw terminals for wires 1,5 mm 2 max.
b-92 apem www.apem.com av se ries anti-vandal pushbutton switches bushing 22 (.866) - momentary (no) b long case - flat actuator - ul-csa approved - av03000...40n short case - flat actuator - av03100...40n hex nut 25 (.984) across flats ?2.00x1.00 si (.866diax1.00 is) 5.00 (.196) 6.30 (.248) (.500) 12.70 3.00 (.118) (.078) 2.00 ?5.00 (.59dia) ?5.00 (.984dia) epoxy 2.80x0.5 (.110x.019) (.110) 2.80 (.287) 7.30 (.047) 1.20 screw terminals av 0 31003c940n solder lug / quick-connect term. av 0 31003c240n screw terminals a v030003a940n hex nut 25 (.984) across flats 22.00x1.00 si (.866diax1.00 is) 5.00 (.196) 10.00 (.248) (.590) 15.00 3.00 (.118) (.078) 2.00 15.00 (.59dia) 25.00 (.984dia) curved actuator screw terminals a v02?03c940n solder lug / quick-connect term. a v02?03c240n flatted bushing flat actuator screw terminals a vm3?03c940n curved actuator screw terminals a vm2?03c940n other configurations 3.60 (.141) (.078) 2.00 15.00 (.590dia) 25.00 (.984dia) (.984dia) 25.00 (.590dia) 15.00 (.393 10.00 22.20 (.874dia) ) no (function 3) order format series bush./act. config. case style function contact material te r minal type bush./act. material sealing av 03 02 m3 m2 100 000 3 c 9 2 c a 40 n t basic model to order a sealed product, replace n with t at the end of p/n. case style : replace ?with 1 for short case and 0 for long case. new! screw terminals for wires 1,5 mm 2 max. screw terminals for wires 1,5 mm 2 max.
apem www.apem.com b-93 av se ries security pushbutton switches with large actuator bushing 22 (.866) - momentary (combined nc/no) b combined nc/no recessed actuator av 22lc402 curved actuator a v22lb402 specifications max. current/voltage rating with resistive load : 5a 250vac ?initial contact resistance : 100 m ? max. insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 2.000 vrms 50 hz min. between terminals and frame electrical life : 1.000.000 cycles at 1a 250vac 50.000 cycles at full load ? orque : 5 nm min.- 14 nm max. applied to nut ?panel thickness : 1 (.039) to 6 mm (.236) max. ?operating temperature : -20? to +55? ?mechanical life : 3.000.000 cycles ?front panel sealing : ip65 ?packaging unit : 20 pieces (except black chrome plated : 16 pieces) materials ?case : polyester, glass filled ?contacts : silver/nickel alloy ?bushing : stainless steel (std) ?actuator : stainless steel (std) cut - out ?panel cut-out : 22,2 (.874) or 24,2 (.952) ?min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) order format series bushing diameter bush./act. config. actuator style bush./act. matl contact/ terminals av 22 p b c 2 4 see next page. l 40 flat actuator - solder lug terminals - av22lp hex nut 25 (.984) across flats (.118) 3.00 4.00 (.157) 0.50 (.019) (1.023dia) 26.00 (.787dia) 20.00 29.00 (1.142) (.492) 12.50 22.00x1.00 si (.094) (.055) 1.40 (.866diax1.00 is) 2.40 av 22lp402 basic model other configurations all model numbers below are for switches with standard bushing/actuator material. ? o-ring
b-94 apem www.apem.com av se ries security pushbutton switches with large actuator bushing 24 (.944) - low profile - momentary (combined nc/no) b 4 curved actuator a v24lb402 recessed actuator av 24lc402 flat actuator - solder lug terminals - av24lp hex nut 27 (1.062) across flats (1.213) 20.00 (.787dia) (1.181dia) (.051) 1.30 (.157) 4.00 30.00 (.559) 14.20 30.80 (.944diax1.00 is) 24.00x1.00 si 0.50 (.019) 1.40 (.055) (.094) 2.40 av 24lp402 basic model other configurations models with non-anodized actuator code bushing actuator 40 (standard) stainless steel stainless steel 20 chrome plated brass chrome plated brass models with anodized actuator code bushing actuator colour 1 black chrome plated brass 2 ? hrome plated brass 4 stainless steel 2 (standard) nc/no, solder lug terminals 4 nc/no, quick-connect terminals bushing / actuator material contact / terminals for non-standard material, replace 40 with one of the following codes. ? o-ring ?.40 (.055 dia) (.110) 2.80 replace ?with one of the following codes : 1 : blue - 2 : black - 3 : pale green - 3f : dark green - 4 : natural - 5 : gold yellow 6 : red - 6b : maroon
apem www.apem.com b-95 av se ries mushroom head security pushbutton switches bushing 22 (.866) - momentary (combined nc/no) b 4 combined nc/no specifications max. current/voltage rating with resistive load : 5a 250vac ?initial contact resistance : 100 m ? max. insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 2.000 vrms 50 hz min. between terminals and frame electrical life : 1.000.000 cycles at 1a 250vac 50.000 cycles at full load ? orque : 5 nm min.- 14 nm max. applied to nut ?panel thickness : 1 (.039) to 6 mm (.236) max. ?operating temperature : -20? to +55? ?mechanical life : 1.000.000 cycles ?front panel sealing : ip65 ?packaging unit : 16 pieces materials ?case : polyester, glass filled ?contacts : silver/nickel alloy ?bushing : brass, nickel plated ? actuator : aluminium, anodized cut - out ?panel cut-out : 22,2 (.874) ?min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) order format series bushing diameter bush./act. config. actuator colour contact/ terminals av 22 see below 2 4 pna solder lug terminals - red actuator - av22pna hex nut 25 (.984) across flats (o-ring) ?0.00 10.80 (.425) (1.181dia) 4.00 (.157) (.866diax1.00 is) (.019) 0.50 ?2.00x1.00 si (.334) joint 25.00 (.984) 8.50 (.094) 2.40 (.055) 1.40 a v22pna62 basic model 1 : blue - 2 : black - 3 : pale green - 3f : dark green - 4 : natural - 5 : gold yellow - 6 : red - 6b : maroon actuator anodization colour 2 (standard) nc/no, solder lug terminals 4 nc/no, quick-connect terminals contact / terminals ?.40 (.055 dia) (.110) 2.80
b-96 apem www.apem.com av se ries security pushbutton switches bushing 16 (.629) - momentary (no) b curved actuator w. chamfer a v0830c900 curved actuator a v1630c900 3.00 1.50 (.059) (.118) no (function 3) specifications max. current/voltage rating with resistive load : 200ma 48 vdc - 100ma 48vdc ?initial contact resistance : 50 m ? max. insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 2.000 vrms 50 hz min. between terminals and frame electrical life : 50.000 cycles at 200ma 48vdc 100.000 cycles at 100ma 48vdc ? orque : 5 nm min.- 14 nm max. applied to nut ?panel thickness : 1 (.039) to 6 mm (.236) max. ?operating temperature : -30? to +70? ?mechanical life : 1.000.000 cycles ?packaging unit : 60 pieces materials ?case : pbt ?contacts : brass, silver plated (c) ?bushing and actuator : nickel plated brass (std) cut - out ?panel cut-out : 16,2 (.637) ?min. pitch for matrix mounting : 24 mm x 24 mm (.944 x .944) order format series bush./act. config. function case style contact matl. ter m. type bush./act. material see ?ptions?page. k sealing av 06 16 08 3 0 c 9 00 flat actuator - screw terminals - av06 hex nut 19 (.748) across flats (.708dia) ?8.00 (.374) 9.50 1.50 (.059) ?2.00 (.472dia) (.440) 11.20 (.118) 3.00 (.118) 3.00 (.629diax1.00 is) ?6.00x1.00 si a v0630c900 basic model other configurations (.059) 1.50 (.078) 2.00 all model numbers below are for switches with standard bushing/actuator material, without marking. screw terminals for wires 1,5 mm 2 max.
apem www.apem.com b-97 av se ries security pushbutton switches bushing 16 (.629) - latching action b new! quick-connect terminals flat actuator curved actuator av 0611a800 av1611a800 straight pc terminals flat actuator curved actuator av 0611a400 av1611a400 5.08 (.200) 0.50 (.019) 1.10 (.043) epoxy 3.50 (.137) specifications max. current/voltage rating with resistive load :1,5a 250vac - 1a 24vdc ?initial contact resistance : 50m ? max. insulation resistance : 1 g ? min. at 500vdc ?dielectric strength : 1.500 vrms 50 hz min. between terminals 1 000 vrms 50 hz between terminals and frame electrical life : 100.000 cycles at 1,5a 250vac 40.000 cycles at 1a 24vdc ? orque : 5 nm min. - 14 nm max. applied to nut ?panel thickness : 1 (.039) to 6 mm (.236) max. ?operating temperature : -30? to +70? ?mechanical life : 200.000 cycles ?packaging unit : 25 pieces off on materials ?case : pa-6t, ul94-v0 ?contacts : silver (a) gold plated silver (ad) on request. ?bushing and actuator : nickel plated brass (std) cut - out ?panel cut-out : 16,2 (.637) ?min. pitch for matrix mounting : 24 mm x 24 mm (.944 x .944) order format series bush./act. config. function case style contact matl. ter m. type bush./act. material see ?ptions?page. k sealing av 06 16 4 2 8 1 1 a 00 solder lug terminals - av..11a200 hex nut 19 (.748) across flats 12.00 (.472dia) 18.00 (.708dia) 3.40 (.133) 1.50 (.059) 9.00 (.354) 15.20 (.598) 1.40 (.055) 2.30 (.090) 3.00 (.118) 3.00 (.118) 16.00x1.00 si (.629diax1.00 is) 18.00 (.708dia) 12.00 (.472dia) epoxy flat actuator av 0611a200 off - on curved actuator av 1611a200 off - on basic model other configurations 2.80 (.047) 1.20 (.047) 2.40 (.094) 0.50 (.019) 8.00 (.314) epoxy all model numbers below are for switches with standard bushing/actuator material, without marking.
b-98 apem www.apem.com av se ries security pushbutton switches bushing 19 (.748) - momentary (combined nc/no) b solder lug terminals - av19..007 4 2 1 3 19.00x1.00 si (.748diax1.00 is) 12.60 (.496) 3.60 (.141) 13.10 (.515) 22.00 (.866dia) 15.00 (.590) 2.00 (.078) 3.60 (.141) 1.50 (.059) 0.50 (.019) 2.00 (.078) 15.00 (.590) 22.00 (.866dia) specifications max. current/voltage rating with resistive load : 5a 250vac - 5a 125vac - 6.000 cycles 5a 15vdc - 3a 30vdc - 50.000 cycles ?initial contact resistance : 100 m ? max. insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 2.000 vrms 50 hz min. between term. and frame ? orque : 5 nm min.- 14 nm max. applied to nut ?panel thickness : 1 (.039) to 9 mm (.354) max. ?operating temperature : -20? to +85? ?mechanical life : 1.000.000 cycles ?front panel sealing : ip65 ?packaging unit : 20 pieces combined nc/no 4 2 1 3 order format series bushing diameter bush./act. config. actuator style bush./act. matl contact/ terminals av 19 p b see below l 00 7 materials ?case : pa 6/6 ?contacts : silver ?bushing : nickel pl. brass (std) ?actuator : nickel pl. brass (std) cut - out ?panel cut-out : 19,2 mm (.755) ?min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) hex nut 22 (.866) across flats flat actuator av 19lp007 curved actuator a v19lb007 basic model all model numbers below are for switches with standard bushing/actuator material. ? o-ring code bushing actuator 00 (std) nickel plated brass nickel plated brass 20 chrome plated brass chrome plated brass 40 stainless steel stainless steel bushing / actuator material for non-standard material, replace 00 with one of the following codes. new!
apem www.apem.com b-99 av se ries security pushbutton switches bushing 19 (.748) - momentary (no) b no (function 3) short case - flat actuator - av09100...00 hex nut 22 (.866) across flats (.748diax1.00 is) (.531) ?2.00 (.590dia) (.866dia) ?5.00 (.078) 2.00 (.216) 5.50 13.50 (.196) 5.00 (.118) 3.00 ?9.00x1.00 si epoxy 2.80x0.5 (.110x.019) 1.20 (.047) 2.80 (.110) 7.30 (.287) specifications max. current/voltage rating with resistive load (c contacts): 2a 48 vdc ?approved ratings of models with long case and a contacts (av..000) : ul-csa : 4a 250vac - 8a 125vac - 6.000 cycles ?initial contact resistance : 10 m ? max. at 1a 2v insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 2.000 vrms 50 hz min. between terminals and frame 2.000 vrms 50 hz min. between terminals electrical life : 10.000 cycles at full load ? orque : 5 nm min.- 14 nm max. applied to nut ?panel thickness : 1 (.039) to 11 mm (.433) max. ?operating temperature : -30? to +70? ?mechanical life : 1.000.000 cycles ?packaging unit : 40 pieces screw terminals a v091003c900 solder lug / quick-connect term. a v091003c200 long case - flat actuator - ul-csa approved - av09000...00 (.413) 10.50 (.582) 14.80 (.196) 5.00 2.00 (.078) 19.00x1.00 si 3.00 22.00 15.00 (.866dia) (.590dia) (.748diax1.00 is) (.118) screw terminals a v090003a900 materials ?case : pbt ?contacts : brass, silver plated (c) or silver (a) ?bushing : brass, nickel plated (std) ? actuator : brass, nickel plated (std) cut - out ?panel cut-out : 19,2 mm (.755) ?min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) order format series bush./act. config. case style function contact matl. ter m. type bush./act. material see ?ptions?page. marking sealing av 09 19 9p 9b 100 000 3 c 9 2 k c a 00 basic model all model numbers below are for switches with standard bushing/actuator material, without marking. hex nut 22 (.866) across flats new! screw terminals for wires 1,5 mm 2 max. screw terminals for wires 1,5 mm 2 max.
b-100 apem www.apem.com av se ries security pushbutton switches bushing 19 (.748) - momentary (no) av se ries security pushbutton switches bushing 19 (.748) - other electrical functions b other configurations curved actuator screw terminals a v19?03c900 solder lug / quick-connect terminals a v19?03c200 with knurled nut for matrix mounting 25 (.984) x 25 (.984) flat actuator, screw term. curved actuator, screw term. a v9p?03c900 av9b?03c900 flat actuator, solder lug term. curved act., solder lug term. a v9p?03c200 av9b?03c200 wr ench available under p/n u1929 . 15.00 (.590dia) 22.00 15.00 (.866dia) (.590dia) (.177) 4.50 (.866dia) 22.00 25.00 25.00 25.00 (.984) (.984) (.984) 4.50 (.177) (.078) (.590dia) (.866dia) 2.00 15.00 22.00 (.141) 3.60 case style : replace ?with 1 for short case and 0 for long case. bushing 19 (748) - combined nc/no - av..9035 (.590dia) 15.00 22.00 15.00 (.866dia) (.590dia) 19.00x1.00 si (.748diax1.00 is) 2.00 (.078) 3.00 (.118) 15.00 (.590) 7.50 (.295) 5.20 (.204) (.141) 3.60 (.200) 5.08 (.078x.015) 2.00x0.40 (.031) 0.80 (.047) 1.20 hex nut 22 (.866) across flats ?single pole, solder lug terminals ?gold plated silver contacts ? urrent/voltage rating with resistive load : max. : 1a 30v - min : 10? 5v note : a current above 100ma damages the gold plating. ?dielectric strength : 1.000 vrms between terminals 2.000 vrms between terminals and frame electrical life : 250.000 cycles at full load ?mechanical life : 1.000.000 cycles ?packaging unit : 20 pieces ?further specifications : see previous page. flat actuator curved actuator a v099035d200 av199035d200 bushing/actuator materials, marking and sealing : see ?ptions?page.
apem www.apem.com b-101 av se ries security pushbutton switches bushing 22 (.866) - momentary (no) b short case - flat actuator - av03100...00 hex nut 25 (.984) across flats ?2.00x1.00 si (.866diax1.00 is) 5.00 (.196) 6.30 (.248) (.500) 12.70 3.00 (.118) (.078) 2.00 ?5.00 (.59dia) ?5.00 (.984dia) epoxy 2.80x0.5 (.110x.019) (.110) 2.80 (.287) 7.30 (.047) 1.20 screw terminals a v031003c900 solder lug / quick-connect term. a v031003c200 long case - flat actuator - ul-csa approved - av03000...00 hex nut 25 (.984) across flats 22.00x1.00 si (.866diax1.00 is) 5.00 (.196) 10.00 (.248) (.590) 15.00 3.00 (.118) (.078) 2.00 15.00 (.59dia) 25.00 (.984dia) screw terminals a v030003a900 no (function 3) specifications max. current/voltage rating with resistive load (c contacts): 2a 48 vdc ?approved ratings of models with long case and a contacts (av..000) : ul-csa : 4a 250vac - 8a 125vac - 6.000 cycles ?initial contact resistance : 10 m ? max. at 1a 2v insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 2.000 vrms 50 hz min. between terminals and frame 2.000 vrms 50 hz min. between terminals electrical life : 10.000 cycles at full load ? orque : 5 nm min.- 14 nm max. applied to nut ?panel thickness : 1 (.039) to 11 mm (.433) max. ?operating temperature : -30? to +70? ?mechanical life : 1.000.000 cycles ?packaging unit : 20 pieces materials ?case : pbt ?contacts : brass, silver plated (c) or silver (a) ?bushing : brass, nickel plated (std) ? actuator : brass, nickel plated (std) cut - outs ?panel cut-out : 22,2 mm (.874) ?min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) order format series bush./act. config. case style function contact matl. ter m. type bush./act. material marking av sealing 03 02 m3 m2 100 000 3 c 9 2 k c a 00 basic model all model numbers below are for switches with standard bushing/actuator material, without marking. see ?ptions?page. new! screw terminals for wires 1,5 mm 2 max. screw terminals for wires 1,5 mm 2 max.
b-102 apem www.apem.com av se ries security pushbutton switches bushing 22 (.866) - momentary (no) av se ries security pushbutton switches bushing 22 (.866) - other electrical functions b curved actuator screw terminals a v02?03c900 solder lug / quick-connect terminals a v02?03c200 3.60 (.141) (.078) 2.00 15.00 (.590dia) 25.00 (.984dia) other configurations flatted bushing flat actuator screw terminals a vm3?03c900 curved actuator screw terminals a vm2?03c900 (.984dia) 25.00 (.590dia) 15.00 (.393 10.00 22.20 (.874dia) ) case style : replace ?with 1 for short case and 0 for long case. bushing 22 (.866) - normally closed (nc) - av..1200 bushing 22 (.866) - alternate action - av..4700 ?single pole, screw terminals, without marking silver plated copper contacts (c) ?max. current/voltage rating with resistive load : 2a 250vac - 3a 125vac - 2,5a 24vdc ?dielectric strength : 2.000 vrms 50 hz min. betw. term. and frame 2.000 vrms. 50 hz min. between terminals electrical life : 100.000 cycles at 0,3a 24vac or dc 10.000 cycles at full load ?packaging unit : 20 pieces flat actuator curved actuator a v031202c00 av021202c00 ?double pole, solder lug/quick-connect term., curved actuator silver contacts ?max. current/voltage rating with resistive load : 3(1,5)a 250vac - 6a 125vac - 3a 24vac or dc ?dielectric strength : 3.000 vrms min. between terminals and frame electrical life : 10.000 cycles at full load 50.000 cycles at 1a 24vac or dc ?mechanical life : 100.000 cycles ?packaging unit : 10 pieces a v044746a200 on - on (.984dia) 25.00 15.00 (.59dia) 7.00 (.275) 15.40 (.606) (.551) (.141) 14.00 3.60 (.59dia) 15.00 2.00 (.078) (.118) 3.00 22.00x1.00 si (.866diax1.00 is) (.118diax.0.50) 3.00x0.50 13.20 (.519) hex nut 25 (.984) across flats hex nut 25 (.984) across flats 25.00 (.984dia) (.551) (.141) 14.00 3.60 (.59dia) 15.00 1.60 (.063) (.118) 3.00 22.00x1.00 si (.866diax1.00 is) (.811) 20.60 7.20 (.283) 5.80 (.228) 8.40 (.330) 0.50x2.80 (.019x.110) further specifications : see previous page. bushing/actuator materials, marking and sealing : see ?ptions?on next page.
apem www.apem.com b-103 av se ries security pushbutton switches options b flat or curved metal actuator ** option 80 not available on models with dia. 16 mm (.629) bushing code bushing actuator 00 (standard) nickel plated brass nickel plated brass 10 nickel plated brass stainless steel 12 nickel plated brass chrome plated brass 20 chrome plated brass chrome plated brass 30 chrome plated brass stainless steel 40 stainless steel stainless steel 80 ** va r nished polished brass varnished polished brass flat thermoplastic actuator (not available with dia. 16 mm (.629) bushing) code bushing actuator colour 0 (standard) nickel plated brass 2 chrome plated brass 8 va r nished polished brass bushing / actuator material replace ?with one of the following codes. 1 : blue - 2 : black - 3 : green - 4 : grey 5 : yellow - 6 : red - 7/1 : white - 9 : orange for flat or curved actuator. not available on model av031202c00. - by engraving on brass actuator (stainless steel on request) - by hot stamping on thermoplastic actuator. colour of marking code colour brass actuator 0 (standard) same as finish 2 black note : a finished product supplied in version ??cannot be modified to version "2". thermoplastic actuator 2 black 7 white type of marking code type 0 to 9 numbers 0 to 9 x symbol * y symbol # a to n letters a to n p to w letters p to w 0 letter o letter o : same code and same design as number 0. for special symbols, consult factory. minimum order : 500 pieces (0.059) 1.50 (0.314) 8.00 (0.590dia) 15.00 marking select an option from each of the two tables below. for non-standard material, replace 00 with one of the following codes. after selecting basic model number, fill in last 3 boxes with desired options. series bush./act. config. case style function contact matl. ter m. type bush./act. material marking sealing av k front panel sealing (ip65) 1 2 1 2 sealing ? elastomeric membrane ? external gasket ? internal gasket ? external gasket blank no sealing for types with bushing 19 or 22 k frontal panel sealing (ip65) for types with bushing 16
b-104 apem www.apem.com av se ries snap-action security pushbutton switches bushing 19 (.748) - illuminated or not - momentary (no) b flat actuator - illuminated solder lug terminals a v09c7l3d200 screw terminals a v09c7l3d900 no (function 3) specifications max. current/voltage rating with resistive load : 50ma 24vdc ?led voltage and consumption : 2-colour led : 2v (3v max.) 20ma other colours : 2v (3v max.) 10ma a resistor must be series-connected by the user.** ?initial contact resistance : 100 m ? max. insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 500 vrms 50 hz min. between terminals 2.000 vrms 50 hz min. between terminals and bushing electrical life : 1.000.000 cycles at full load ?operating force : 7 n +/-2n ?travel : 0,7 mm (.027) +/- 0,1 mm (.003) ? orque : 5 nm min.- 14 nm max. applied to nut ?panel thickness : 1 (.039) to 11 mm (.433) max. ?operating temperature : -30? to +70? ?soldering : 270? max. during 3 sec. ?packaging unit : 40 pieces ** resistor value = supply voltage - led for war d voltage led forward current flat actuator - non-illuminated hex nut 22 (.866) across flats solder lug terminals a v09c703d200 screw terminals a v09c703d900 also available with curved actuator : a v19c703d200 or a v19c703d900 materials ?case : pbt ul94-v0 ?terminals : brass, gold plated ?contacts : gold plated dome ?bushing : brass, nickel plated (std) ? actuator : brass, nickel plated (std) ?led cut - outs ?panel cut-out : 19,2 mm (.755) ? min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) (.074) 1.90 (.153) 3.90 (.043) 1.10 19.00x1.00 si 3.00 22.00 15.00 2.00 13.50 (.866dia) (.590dia) (.748diax1.00 is) (.118) (.078) (.531) (.163) 4.15 (.590dia) (.866dia) 15.00 22.00 epoxy (.519) 13.20 13.50 (.531) (.078) 2.00 (.531) (.078) (.118) (.748diax1.00 is) (.590dia) (.866dia) 13.50 2.00 15.00 22.00 3.00 19.00x1.00 si 1.10 (.043) 3.90 (.153) 4.15 (.163) 1.90 (.074) (.393dia) 10.00 epoxy (.590dia) (.866dia) 15.00 22.00 (.078) 2.00 (.519) 13.20 13.50 (.531) order format series bush./act. config. case style funct. illum. or not contact matl. ter m. type bush./act. material marking led colour seal. av 00 09 19 l 0 2 9 c7 3 d 2 k see ?ptions?on next page. all model numbers below are for switches with standard bushing/actuator material, without marking. hex nut 22 (.866) across flats + -
apem www.apem.com b-105 av se ries snap-action security pushbutton switches options b non-illuminated models code bushing actuator 00 (std) nickel plated brass nickel plated brass 10 nickel plated brass stainless steel 30 chrome plated brass stainless steel 40 stainless steel stainless steel 80 va rn ished polished brass varnished polished brass illuminated models code bushing actuator 00 (std) nickel plated brass nickel plated brass 20 chrome plated brass chrome plated brass 40 stainless steel stainless steel 45 stainless steel nickel plated brass 80 va r nished polished brass varnished polished brass blank no led 1 : blue - 3 : green - 5 : yellow - 6 : red - 7 : white - 9 : amber - 2 : red/green k front panel sealing (ip65) 1 2 ? internal gasket ? external gasket bushing / actuator material led colour for non-standard material, replace 00 with one of the following codes. series bush./act. config. case style funct. illum. or not contact matl. ter m. type bush./act. material marking led colour seal. av for flat or curved actuator. - by engraving on non-illuminated brass actuator (stainless steel on request). - by hot stamping on thermoplastic insert ( illuminated actuators) colour of marking code colour non-illuminated actuators 0 (standard) same as finish 2 black note : a finished product supplied in version ??cannot be modified to version "2". illuminated actuators 2 black (on white) type of marking code type 0 to 9 numbers 0 to 9 x symbol * y symbol # a to n letters a to n p to w letters p to w 0 letter o letter o : same code and same design as number 0. for special symbols, consult factory. minimum order : 500 pieces (0.059) 1.50 (0.314) 8.00 10.00 (0.393dia) (0.039) 1.00 marking select an option from each of the two tables below. sealing blank no sealing after selecting basic model no., fill in last 4 boxes with desired options.
b-106 apem www.apem.com av se ries snap-action security pushbuttons with overmolded actuator bushing 19 (.748) - illuminated or not - momentary (no) b new! specifications max. current/voltage rating with resistive load : 50ma 24vdc ?led voltage and consumption : 2-colour led : 2v (3v max.) 20ma other colours : 2v (3v max.) 10ma a resistor must be series-connected by the user.** ?initial contact resistance : 100 m ? max. insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 500 vrms 50 hz min. between terminals 2.000 vrms 50 hz min. between terminals and bushing electrical life : 1.000.000 cycles at full load ?operating force : 7 n +/-2n ?travel : 0,7 mm (.027) +/- 0,1 mm (.003) ? orque : 5 nm min.- 14 nm max. applied to nut ?panel thickness : 1 (.039) to 11 mm (.433) max. ?operating temperature : -30? to +70? ?soldering : 270? max. during 3 sec. ?packaging unit : 40 pieces ** resistor value = supply voltage - led for war d voltage led forward current materials ?case : pbt ul94-v0 ?terminals : brass, gold plated ?contacts : gold plated dome ?bushing : brass, nickel plated (std) ? actuator : stainless steel, with thermoplastic overmolding ?led cut - outs ?panel cut-out : 19,2 mm (.755) ? min. pitch for matrix mounting : 30 mm (1.181) x 30 mm (1.181) no (function 3) order format series bush./act. config. illum. or not contact matl. ter m. type bush. material actuator style led colour seal. av 9 0 s0 sl 2 4 d over- molding k see ?ptions?on next page. solder lug terminals hex nut 22 (.866) across flats (.385) (.078) (.118) (.590dia) (.866dia) 9.80 2.00 15.00 22.00 3.00 1.10 (.043) 4.30 (.169) 4.15 (.163) 1.90 (.074) (.393dia) 10.00 epoxy (.590dia) (.866dia) 15.00 22.00 (.078) 2.00 also available with bushing 22 (.866) : on request. illuminated a v9sld2 non illuminated a v9s0d2 straight pc terminals hex nut 22 (.866) across flats (.385) (.078) (.118) (.590dia) (.866dia) 9.80 2.00 15.00 22.00 3.00 4.30 (.169) 6.00 (.236) (.393dia) 10.00 epoxy (.590dia) (.866dia) 15.00 22.00 (.078) 2.00 4.00 (.157) also available with bushing 22 (.866) : on request. illuminated a v9sld4 non illuminated a v9s0d4
apem www.apem.com b-107 av se ries snap-action security pushbuttons with overmolded actuator options b new! code material 0 (std) nickel plated brass 2 chrome plated brass 4 stainless steel 5 gold plated brass 6 chrome plated brass, satin 7 chrome pl. brass, matt black 8 va r nished polished brass 9 polished brass k front panel sealing (ip65) 1 2 ? internal gasket ? external gasket bushing materials code colour 1 blue 2 black 3 green 4 grey 5 y ellow 6 red 7 white 8 t ranslucent 9 orange colour of overmolding code colour blank no led 1 blue 2 red/green 3 green 5 y ellow 6 red 7 white 9 amber led colours the ring and symbols are obtained by photochemical engraving of a stainless steel insert. the insert is then overmolded in the desired colour. the following actuator styles are available. for other types, consult factory. actuator styles sealing blank no sealing after selecting basic model no., fill in last 5 boxes with desired options. code 001 002 003 004 005 description illuminated ring and disc illuminated ring arrow loudspeaker off double arrow ring / symbol series bush./act. config. illum. or not contact matl. ter m. type bush. material actuator style led colour seal. av over- molding

▲Up To Search▲

Price & Availability of AV9SLD2023002K

	To Download AV9SLD2023002K Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .